Welcome to Pepperl-Fuchs International!
UniCOM PROFIBUS DP/DP V1 Bus Coupler
LB8109*
Serviceline Information
Service+Support for Remote I/O- Find service information and technical support for Remote I/O Systems.
- Interface between the I/O modules and the DCS/PLC
- Bus coupler for 80 analog or 184 digital channels
- Communication via PROFIBUS DP
- HART communication via PROFIBUS DP V1 or service bus
- Configuration via FDT 1.2 DTM
- Configuration in run (CiR) for any DCS
- Non-volatile memory for configuration and parameter settings
- Self configuration in redundant systems
- Permanently self-monitoring
- Outputs drive to safe state in case of failures
- Installation in Zone 2, Zone 22, Div. 2, or safe area
- Module can be exchanged under voltage (hot swap)
Datasheet as PDF in following languages:
Technical Data: LB8109*
| Supply | ||
| Connection | backplane bus | |
| Rated voltage | 5 V DC , only in connection with the power supplies LB9*** | |
| Power consumption | 2 W | |
| Fieldbus interface | ||
| PROFIBUS DP | ||
| Connection | 9-pin Sub-D socket via backplane | |
| Baud rate | up to 1.5 MBit/s | |
| Protocol | PROFIBUS DP/DP V1 read/write services | |
| Number of stations per bus line | max. 125 (PROFIBUS), max. 119 (service bus) | |
| Number of channels per station | max. 80 analog, max. 184 digital (standard configuration) | |
| Number of stations per bus segment | max. 31 (RS 485 standard) | |
| Number of repeaters between Master and Slave | max. 3 | |
| Supported I/O modules | all LB Remote I/O modules | |
| Configuration (240 bytes I/O) | Standard: 80 analog, 184 digital Universal 2I2O: 48 analog, 184 digital Universal 4I4O: 60 analog, 120 digital |
|
| Bus length | max. 1000 m (FOL, 1.5 MBaud), max. 1000 m (copper cable, 187.5 kBd), max. 200 m (copper cable, 1.5 MBd) |
|
| Addressing | via configuration software | |
| PROFIBUS address | 0 ... 126 (ex works standard: 126) |
|
| GSE file | CGV61710.gsd/gse | |
| HART communication | via PROFIBUS or service bus | |
| Internal bus | ||
| Connection | backplane bus | |
| Redundancy | via backplane | |
| Indicators/settings | ||
| LED indicator | LED 1 (power supply): On = operating, fast flash = cold start, slow flash = HCIR loading active LED 2 (collective alarm): On = internal fault, flashing = no PROFIBUS connection LED 3 (status process bus): flashing = PROFIBUS receive channel active LED 4 (status service bus): flashing = service bus receive channel active LED 5 (operating mode): flashing 1 (1:1 ratio) = active, normal operation; flashing 2 (7:1 ratio) = active, simulation LED 6 (status process bus): flashing = PROFIBUS response channel active LED 7 (status servicebus): flashing = service bus response channel active |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2004/108/EC | EN 61326-1 | |
| Conformity | ||
| Electromagnetic compatibility | NE 21 | |
| Protection degree | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Shock resistance | shock type I, shock duration 11 ms, shock amplitude 50 m/s2, number of shock directions 6, number of shocks per direction 100 | |
| Vibration resistance | frequency range 5 ... 500 Hz, amplitude 5 ... 13.2 Hz ± 1.5 mm, 13.2 ... 100 Hz 1g, sweep rate 1 octave/min, duration 10 sweeps 5 Hz - 100 Hz - 5 Hz | |
| Damaging gas | for plugs: 21 days in 25 ppm SO2, at 25 °C and 75 % rel. humidity, device G3 | |
| Mechanical specifications | ||
| Protection degree | IP20 (module) , mounted on backplane | |
| Connection | via backplane | |
| Mass | approx. 120 g | |
| Dimensions | 32 x 100 x 103 mm (1.26 x 3.9 x 4 in) | |
| Data for application in connection with Ex-areas | ||
| Declaration of conformity | PF 08 CERT 1234 X | |
| Group, category, type of protection, temperature class |  II 3 G Ex nA IIC T4 |
|
| Directive conformity | ||
| Directive 94/9/EC | EN 60079-0 , EN 60079-15 | |
| International approvals | ||
| UL approval | E106378 | |
| IECEx approval | BVS 09.0037X | |
Documents: LB8109*
| Instructions, Short instructions, Safety information | Language | File Type | File Size |
| Betriebsanleitung LB8109/Operating instructions LB8109 | ALL | 72 KB | |
| Anhang zur Betriebsanleitung: Hinweise zum Einsatz auf See/Annex to Instructions: Application Note for Marine Applications | ALL | 89 KB | |
| Manuals | |||
| LB Hardware Manual | ENG | 2233 KB | |
| LB-Hardware-Handbuch | GER | 2235 KB | |
| Software Manual for UniCom Bus Coupler 8x09 | ENG | 14048 KB | |
| Software-Handbuch für UniCom Buskoppler 8x09 | GER | 13857 KB | |
Approvals+Certificates: LB8109*
| Certificates | Certificate No. | File Type | File Size |
| USA UL | E106378 UL (QUZW) | LINK | --- |
| Canada UL | E106378 cUL (QUZW7) | LINK | --- |
| Europe Pepperl+Fuchs II 3 G Declaration of Conformity | PF 08 CERT 1234 X | 1531 KB | |
| Europe Pepperl+Fuchs 94/9/EC - 2004/108/EC Declaration of Conformity | PF 08 CERT 1263 | 370 KB | |
| BVS IECEx Certificate of Conformity | IECEx BVS 08.0011X | LINK | --- |
| DEKRA EXAM IECEx Certificate of Conformity | IECEx BVS 09.0037X | LINK | --- |
| Russia NANIO "CCVE" GOST-R | RUSS.IT.GB 05.B03171 | 5562 KB | |
| Bureau Veritas Marine | 22449/A0 BV | 81 KB | |
| Det Norske Veritas Marine | A-11866 | 1915 KB | |
| American Bureau of Shipping (ABS) Marine | 10-HG639253-PDA | 1188 KB | |
| China NEPSI nAc *** | GYJ101410X | 6945 KB |
Software: LB8109*
| Device Type Managers | Release Info | File Type | File Size |
| DTM Collection Remote IO/DTM Collection Remote IO | 7.6.1 | ZIP | 47604 KB |
| Drivers | |||
| EDD für Simatic PDM 5.xx und 6.xx/EDD for Simatic PDM 5.xx and 6.xx | 6.45 | ZIP | 550 KB |
| GSD 1710/GSE 1710 | 1.09 | ZIP | 8 KB |
Associated Products: LB8109*
| Predecessor product | Name |
| LB8105* | PROFIBUS DP/DP V1 Bus Coupler |
| LB8108* | PROFIBUS DP/DP V1 Bus Coupler with Time Stamp Option |
| Accessories | Name |
| DTM LB/FB | DTM collection |